Plumbing Fixture Upgrades
The fixture is the part you chose. The shutoff valve behind it is the part that decides how the job actually goes.
This is straightforward work done properly: faucets, toilets, garbage disposals, laundry connections, and the shutoff valves and supply lines behind them.
The item that reliably turns a small job into a slightly larger one is the shutoff valve. In older Houston homes these seize, and a valve that will not close makes any fixture work harder and sometimes impossible without shutting the whole house down. We check them and flag them before replacing anything, so it is never a surprise on the invoice.
We are also happy to say when a repair beats a replacement. A dripping faucet is usually a cartridge. A humming disposal is usually a jam. If the smaller fix genuinely solves it, that is what we will recommend.
When this is likely your problem
What's included — and what isn't
Included in the quote
- Removal and disposal of the old fixture
- Installation of your fixture or one we supply
- New supply lines, wax ring, and bolts as applicable
- Shutoff valve replacement where needed, flagged and approved first
- Disposal and laundry connection work
- Leak check under pressure before we finish
Quoted separately
- Fixtures, faucets, and disposals where supplied by us
- Cabinet, countertop, and tile modification
- Electrical work for hardwired disposals
- Drain blockages beyond the fixture, which is separate scope
- Finish and caulking work beyond the fixture connection
What drives the number
We quote after diagnosis, not before. These move the number most:
- COUNTMultiple fixtures in one visit price considerably better.
- VALVESWhether the existing shutoffs still close.
- FIXTUREWhether you are supplying it or we are.
- ACCESSCabinet and connection access, which varies more than people expect.
Houston note
If you have several small items queued up — a dripping faucet, a running toilet, a disposal that hums — book them together. One visit covering four fixtures costs considerably less than four separate call-outs, and it is the cheapest way to catch up on deferred repairs.
Related
What the visit involves
Confirm what fits
Fixture checked against the existing rough-in before installation day.
Check the shutoffs first
This is the item that most often changes the scope, so we look before starting.
Install, priced flat
Agreed before anything is taken apart.
Test under pressure
Every connection run and checked before we leave.
Questions about this service
Why might a simple faucet swap cost more than quoted?
Almost always because the shutoff valves under the sink have seized. In older homes, valves that have not been turned in decades often will not close or will not reseal. We inspect and tell you before replacing them.
Can I supply my own fixtures?
Yes, and many people do. Send us the model beforehand so we can confirm rough-in compatibility — that single check prevents the most common avoidable delay.
My disposal just hums. Is it dead?
Usually not. A hum means the motor has power but the impeller is stuck. Before calling anyone, try the reset button on the underside. It solves this more often than you would expect and costs nothing.
Can you do several fixtures in one visit?
Yes, and it is the sensible way to buy this work. List everything when you book so we allocate time and bring parts.
Ready to get this looked at?
Call and describe what's happening. You'll get an honest read before anyone drives out.